Standard laser mirrors are usually too large to be used in fiber laser applications. Fibercore Limited LM1000 laser mirrors have been purpose-designed for use with optical fibers. The LM1000 substrates are 10 mm in diameter and only 2 mm thick, dramatically simplifying laser / fiber alignment, and are offered in a matched, input and output set.
Specifications
M1 – Input Mirror
M2 – Output Mirror
Input Surface
anti-reflection coated at 780 nm – 850 nm
>90% reflection at 780 nm – 850 nm
85 – 95% reflection at 1050 nm – 1100 nm
Output Surface
>95% transmission at 780 nm – 850 nm
100% reflection at 1050 nm – 1100 nm
>90% transmission at 1050 nm – 1100 nm
DF1000 FC-PC Pigtails
The design of the FLK1000S input cell is based on a standard FC-PC connector and therefore requires the use of a suitably connectorised DF1000 pigtail. Two 3 m pigtails are provided with each FLK1000S – if you require additional pigtails, or a length greater than 3 m, simply use the part number format described in Section 8 of this catalogue. For example, the part number for the standard FLK1000S pigtail is: FC-PC-DF-1088-3
FLK1000S Manual / Project Book
Comprising more than twenty pages and containing numerous exploded-drawings, schematics and colour photographs, the Manual first provides an introduction to laser theory, then leads the student step-by-step through the assembly and operation of the fiber laser. The Manual concludes with an experiment designed to characterise the fiber laser and illustrate the phenomenon of threshold, plus an introduction to the more advanced laser concepts of wavelength-tuning and Q-switching, which may be investigated with additional equipment. Additional copies are available for purchase.
Ordering Information: Fiber Laser Products
To order any of the Fibercore Limited range of Fiber Laser Products, simply specify the product code (eg. FLK1000) and, for fibers, the length you need for your application.
Fibercore Limited, Fibercore House, University Parkway, Chilworth Science Park, Southampton, Hampshire, SO16 7QQ, United Kingdom
Tel: +44 (0)23 8076 9893 | Fax: +44 (0)23 8076 9895 | Email: info@fibercore.com
